DIY Boho Style Hoodie Cardigan ( pattern for sewing)

PATTERN   buy it here

 PATTERN made in full size for print on A4 paper. Pattern have a test square to set up your print settings. Including PDF files with a pattern, cutting plan, instructions.

-----------------------------------------------    Important!    -------------------------------------------------------

Print settings depend on 

the individual settings of EVERY user's computer screen.

--------------------------------------------------------------------------------------------------------------------------

Difficulty level:

• average.

You will need:

• main fabric 1.50 m wide, 2.50 m long;
• sewing thread;
• decor - additional fabric suitable or contrasting in color, ribbons, a cord etc.

Cutting out of the main fabric:

• front - 2 d;
• back - 1 d with a fold;
• sleeve - 2 d;
• hood - 2 d;
• facing - several details to proceed the front and hood edge, folded in the middle and ironed:  2 d for front = 5 cm wide and 75 cm long ( A), 2 d for hood = 5 cm wide and 30 cm long ( B);

Cutting out of the decor fabric:

• stripes, 3 cm wide and long depends on your will.

Sewing steps:

• Stitch shoulder cuts, sweep allowances and iron to the back.
• Stitch hood details. 
• Sweep allowances and iron on one side.
• Make decorative stitch from the front side.
• Sew a hood in the neckline.
• Process the edge: 
• We measure the actual distance of the edges being processed (from edge to hood, to the middle of the hood).
• Cut strips of the desired size plus 2-3 cm.
• Fold them in half, turning the edge inward by 1 - 1.5 cm and sew along the entire length.
• Bend inward and sew the decorative seam on the front side.

• Sleeves:
• We measure the size along the sleeve, divide this size in half plus 2-3 cm.
• Cut strips of the desired size plus 2-3 cm.
• Fold them in half, turning the edge inward by 1 - 1.5 cm and sew along the entire length.
• A small gap remains near the inner seam of the sleeve.
• Sew sleeves into armholes.
• Sew side seams.
• Process open edges ( sleeves, bottom and front): 
• Bend inward 0.7 cm and sew.
• Now it remains to make strips from the decorative fabric. You can use the ribbons from the store.
• Cut them out with large reserves along the length (for tying knots). Sew inside and then turn on the face.
• Using a pin, we pass the stripes into the formed tunnels along the edge of the front and the hood.
• Tailor along oblique sections of the front.
• Knotting the hanging edges.